We chose the best for your satisfaction
We use quality certified raw materials and ingredients in all Karmod container structures for your safety. Our containers reflect safety in every detail as we produce them by selecting quality certified products for metal parts, wall panels, electrical supplies, clean and waste water supplies, painting, flooring, windows and doors. You can find more information about technical specifications of Karmod's world brand container products.
| CONTAINER TECHNICAL SPECIFICATIONS | |
|---|---|
| PRODUCT DIMENSION | Mention dimensions of the containers in the contract, All dimensions may vary aprox. ± 50mm |
| METAL PARTS | 1311 Erdemir Galvanized |
| CEMENT BOARD | TSE 634-2 |
| TECHNICAL DATA | |
| EARTHQUAKE CONDITIONS | 1st Degree |
| CLIMATE CONDITIONS | 3rd Climate Zone |
| SNOW LOAD | 80 Kg/m² |
| WIND SPEED | 80 Km/h The product must be fixed to the ground. |
| POLYSTYRENE FOAM (EPS) | TS EN 13163 |
| TRANSMISSION COEFFICIENT OF EXTERNAL WALL | 0,46 W/m²K |
| ROOF TRASMISSION COEFFICIENT | 0,26 W/m²K |
| FLOOR HEAT TRANSFER COEFFICIENT | 1,24 W/m²K |
| CHASSIS LOADING CAPACITY | 200 Kg/m² |
| FLOOR | |
| SYSTEM | Specially Shaped profile and bolted joint construction in use. The product must be placed on a flat and stable surface. |
| FLOOR COATING | 2.5 mm thick PVC vinyl are used on 14 mm thick cement board. |
| WALLS | |
| SYSTEM | Specially shaped sandwich panel with EPS insulation. |
| OUTER SURFACE COVERING | Ral 9002 electrostatic painted steel sheet. |
| INNER SURFACE COVERING | Ral 9002 electrostatic painted steel sheet. |
| WALL INSULATION | Produced with 50 mm thick 14 kg/m³ polystyrene foam (EPS) B2 fire class fire resistant, full thermal insulation, healthy and safety materials. |
| ROOF | |
| ROOF SYSTEM | Special shaped clamped (grooved seam) EPS sandwich panels. Rain water will be drained through special clamping system. |
| ROOF INSULATION | Produced with 120 mm thick 14 kg/m³ polystyrene foam (EPS) B2 fire class fire resistant, full thermal insulation, healthy and safe materials. |
| OUTER SURFACE COATING | Ral 9002 electrostatic painted steel sheet. |
| INNER SURFACE COVERING | Ral 9002 electrostatic painted steel sheet. |
| DOORS | |
| EXTERNAL DOOR | Made of Metal door frame and 40 mm sandwich panel that is additionaly reinforced with metal and leakproof gasket and PVC joints. |
| INTERNAL DOOR | MDF door with electrostatic painted galvanized metal frame (1980X755mm) |
| WINDOWS | |
| WINDOW | 875x1135 mm PVC window. Windows are single wing and opens 90 degree. |
| SILL | PVC is used on the window sill of the inside edge. |
| GLASS | Double glazing glass. |
| PAINTING | |
| EXTERIOR AND INTERIOR | Ral 9002 electrostatic painted steel sheet. |
| METAL PARTS | Ral 1019 electrostatic painted steel sheet. |
| ELECTRIC INSTALLATIONS | |
| SYSTEM | On the plaster |
| CABLE | For plugs 3x2,5 and for lighting 2x1,5 NYM TSE certified cables in use. |
| LIGHTING | Materials with TSE certified materials. |
| PLUGS AND SWITCHES | Located in every room. |
| SANITARY INSTALLATIONS | |
| SYSTEM | On the plaster |
| CLOSET PAN | TSE certified ceramic in used. |
| CLOSET | TSE certified ceramic in used. |
| SHOWER TRAY | Acrylic based TSE certified products are in used. (Shower Trays are not in use in our WC-Shower Container products.) |
| SINK | Made of ABS and TSE certified materials in use. |
| FRESH WATER PIPING | PPRC featured material in use with TSE certification. |
| WASTE WATER PIPING | PVC featured materials in use with TSE certification. |
| ACCESORIES | Mirror, toilet paper holder and soap holders etc are TSE certified materials. |
| WC-SHOWER | |
| VENTILATION | Shower curtains are used for shower units. 210mm x 250mm vent is used for shower and WC units. For the hallways 2 units of 600mm x 400mm transoms are used and placed on both sidewalls . |
| FLOOR AND WALL COVERINGS | The shower floor is covered completly with PVC vinyl. Walls are covered with PVC vinyl up to 1300mm height ( except partition walls). In Wc units, walls and floor are covered with PVC vinyl up to minimum 300 mm. The shower floor is covered completly with PVC vinyl. Walls are covered with PVC vinyl up to 1300mm height ( except partition walls). In Wc units, walls and floor are covered with PVC vinyl up to minimum 300 mm. |
| DOOR | For Wc 900mm doors are used, which open outwards. |
| LIGHTING | A Moisture-proof luminaire 2x18 sized fixture is used. |
| DELIVERY | |
| Lifting is made with specially designed brackets and columns. | |
The UK's Best-selling Flat Pack Office Cabins
These are the smallest offices in our flat pack cabinet range. Karmod requires self-assembly. Even with basic assembly skills, a flat pack office cabinet can be quickly put together on site using simple household tools. The 30cm flat pack office can take less than 50 minutes for two people to set up. For the 2.3m and 6m sizes, assembly is still relatively quick and easy, but as a guide, add an extra hour and an extra pair of arms per additional meter. All instructions on how to build your own flat pack office cubicle are provided.
Made of galvanized steel, 5 cm thick walled insulation and double locking system security is an important feature of Karmod. With its glazed window and full high insulation, the interior is light and comfortable. Optional extras are available, including an electrical package and full-height glazed window and door panels. Note that these flat pack offices are modular and can be combined with a simple connectivity kit to create larger areas of portable flat pack office cabins space.
Although flat pack cabin offices have always represented good value for money, certainly by comparison with traditional buildings, and have the advantage of being portable too, the costs of production can be too high for projects with more limited budgets. To bring down the costs and reduce the selling price, in 1986 we launched the Karmod range of steel flat pack cabin offices. The Karmod retains all the benefits of the standard Flat pack cabin office, in terms of strength, portability and security but at a heavily discounted price.
Karmod is a unique product as the only fully human portable 230x600 flat pack office cabin in the market. This is ideal for areas out of reach of large vehicles, as each component is human-portable cabin and a crane is not required. Assembly is simple and only manpower is required to assemble the panels and components to the steel frame and chassis – no special tools or equipment required!
Our Flat pack container offices range includes flat pack office cabins. Known as the Karmod, they start from 2.3m and go up to 6m and beyond. They are ideal for gardens or for large scale commercial projects where access is difficult. Our flat pack office cabins are fully insulated and can be supplied with a wall mounted electrical pack. We also offer the karmod a bespoke self-assembly flat pack chemical store. With a sumped floor and suspended steel grate, these units are the perfect low cost Karmod compliant chemical store.
